5052 5052 aluminum rod rod introduction Material Name: 5052 aluminum rod Standard: GB / T3190-1996 5052 rod for AL-Mg system is the most widely used as a rust-proof aluminum, high strength of this alloy, especially with anti- Fatigue strength: plasticity and high corrosion resistance, heat strengthened ,, not half cold hardening during plastic is still good, when the plastic work hardening is low, good corrosion resistance, good weldability, machinability bad, can be polished. Application 5052 5052 aluminum rod rod is mainly used for purposes requiring high plasticity and good weldability, working in a liquid or gaseous medium low load parts, such as a mailbox, gasoline or oil conduit, liquid containers and various other deep drawing made with a small load parts: wire used to make rivets. Also commonly used in transport vehicles, vessels, sheet metal parts, instruments, lights bracket and rivets, metal products, electrical appliances, such as Shell. Chemical composition of 5052 aluminum rod: Aluminum Al: margin; silicon Si: 0.25; copper Cu: 0.10; Mg Mg: 2.2 ~ 2.8; Zinc Zn: 0.10; Mn Mn: 0.10; chromium Cr: 0.15 ~ 0.35; iron Fe: 0.40. 5052 Mechanical properties Tensile strength aluminum plate (σb): 170 ~ 305MPa Conditions yield strength σ0.2 (MPa) 65 modulus of elasticity (E): 69.3 ~ 70.7Gpa annealing temperature: 345. Relevant product standard rod with national standards (GB / T3880-2006), applicable to the unified standard aluminum strip material.